To manage your downloaded transducers, tap “Settings” in the top left corner of the home screen, then “Hardware” in the Settings navigation.
Transducers are organized into Active and Inactive lists. Only transducers in the Active list can be used in tests. To move a transducer from one list to the other, tap and choose “Deactivate” or “Activate” transducer.
To download a transducer:
- Tap the + symbol in the top right corner of the screen. This will open the “Add Hardware” window
- Tap the “Transducer” panel. This will open the “Add Transducer(s)" window
- You can then choose to either scan the transducer barcode attached to your transducer’s cable, or enter the transducer ID number manually
Once you have the transducer ID number selected, tap “Add Transducer(s)”
Your transducer will now be listed under “Active Hardware”.
If you see a “Calibration Expired” label next to a transducer in the list, it means the transducer is due for re-calibration. Using expired calibration files may affect both your compliance with applicable regulations and the accuracy of your test results.
Please contact email@example.com if you need to recalibrate your transducer.
Last Updated: 2019-09-24
|Next Topic: Updating Transducers →|
Was this article helpful?