Accessing QuickTest Settings

QuickTest Settings on the iPad are mainly read-only, and reflect the settings that you configured in the web portal.

For QuickTest settings accessed on the web portal, see Customizing Your QuickTest Settings.

For everything related to the test setup process, see Test Setup

Settings that can be configured on the iPad include Site Tag and Admin Required.

To access QuickTest Settings:

  1. Launch QuickTest on the iPad
  2. From the home (splash) screen, use two fingers to swipe from the left side of the screen to the right. This will bring up the passcode prompt
  3. Enter your passcode. You will find yourself on the Settings screen

Last Updated: 2019-09-25

 

 

 

  Next Topic: Enabling Admin Required →
Help Center

 

Was this article helpful?